PRODUCTS

+
  • online-refractor-sensor-1158340.jpg

Online Refractor Sensor

Product Category:


The JH-S Online Refractor Sensor will start automatically 10 seconds after power on, and the measurement will be every 5 seconds by default. A flashing green light can be seen on the back panel. Analog output: 24V 4 ~ 20mA.
  • Products Detail
    • Commodity name: Online Refractor Sensor

    The JH-S Online Refractor Sensor will start automatically 10 seconds after power on, and the measurement will be every 5 seconds by default. A flashing green light can be seen on the back panel. Analog output: 24V 4 ~ 20mA.

    Online Refractor Sensor

    The JH-S Online Refractor Sensor will start automatically 10 seconds after power on, and the measurement will be every 5 seconds by default. A flashing green light can be seen on the back panel. Analog output: 24V 4 ~ 20mA.


    One: Appearance

     

    Two: installation method

     

     

    Three: access method
     

    Interface cable color definition:

    1. white/white 4-20ma

    2. brown/brown-----4-20ma GND

    3. Green/green connected to the ground (power protection)

    4. yellow/yellow connected to the earth (485 protection)

    5. gray/gray 485 A+/TXD

    6. pink/pink 485 B-/RXD

    7. blue/blue 24V-

    8. red/red 24V+

    9. Thick black (shielding layer) connector ferrule

     

    Four: working method

     

    The Online Refractor Sensor will start automatically 10 seconds after power on, and the measurement will be every 5 seconds by default. A flashing green light can be seen on the back panel. Analog output: 24V 4 ~ 20mA.

     

    Five. Model performance

     

    JH-S series Online Refractor Sensor JH-S 102 Brix online concentration sensor.

     

     

     

    Measuring range

     

     

     

     

     

     

     

     

     

     

     

    Brix 0.0 ~ 80.0%

     

     

    resolution

    Brix 0.1%

    Refractive index 1.3330~1.4910

    Refractive index 0.0001

    Temperature 0.0 ~ 60.0℃

    Temperature 0.1°C

     

    measurement accuracy

     

    Brix±0.2%

    ambient temperature

    0.0 ~ 60.0℃

    Refractive index±0.0003

    sample size

    Immersion measurement

    Temperature±0.5℃

    withstand voltage

    1 MPa

    measure time

    1 measurement per 5 seconds by default

    degree of protection

    Measuring part IP67

    installation method

     

    Thread, flange, chuck, etc. Support customization.

     

    output

     

    Analog output: 24V 4~20mA corresponding to Brix concentration 0.0~80.0% (customization supported)

    Digital output: RS485

    Other output methods can be customized.

    input

    DC +24V±10% Current<100mA

Hot Products

Messages